Question 1

I Can't find my make and model?

Accepted Answer

If you can't find what your after, we might not of had the chance to make it yet.
So please get in contact with us so we can help you be the first to have it.

Question 2

Where can i get my snorkel installed?

Accepted Answer

Our snorkels are supplied with cutting templates, pinch weld and all the hardware to fit the snorkel.
This means that any shop that does 4x4 accessories fittings, should be more the capable to do the install.

Or get in contact with our team to book in for us to do the installation.
Please be mindful there may be lengthy wait times for installations as these slots fill quickly.

Disclaimer: KRAKEN ENGINEERING takes no responsibility if products are installed incorrectly by 3rd party installers.

Question 3

How do i care for my products?

Accepted Answer

Go to our Product Maintenance page to get information on caring for you products.

Question 4

Do you Ship?

Accepted Answer

We can organize shipping Australia wide and World wide.
You can organize Shipping at checkout.
Alternatively you can organize your own shipping, just select Pick-up and get in contact with us with the details.

Question 5

Can i change my order?

Accepted Answer

We offer a 3-Day grace period for change of design.
Take note this may incur a fee at the discretion of management depending on the change.
We recommend people taking time when deciding before placing order.

Question 6

How do i stop water from getting into my snorkel?

Accepted Answer

Due to the snorkel having an open end and being a vacuum system, there is no way to keep 100% of the water out.
We rely on the factory airbox duck bill and our KRAKEN airbox drain hole to let the water out of the system.

We also have silicone rain stops to fit to the top off your snorkel when travelling at high speeds,
this will help limit the amount of water that gets sucked in.

We also sell foam snorkel socks to help prevent heavy water from getting in.
They also help as a secondary filter when travelling through heavy dust.

Disclaimer: we don't suggest running the silicone water stop constantly in case it causes damage to the snorkel finish.

Question 7

How do i make a custom order?

Accepted Answer

We welcome all enquiries for any job, especially the custom ones.
Feel free to send through your enquiries via email or call us during business hours.

Question 8

Do your tanks comply with race regulations?

Accepted Answer

We design and make our tanks using the 'Motorsports Australia manual' as  a minium guide.
We then go over the top to make sure there is no issues with scrutineering.

Disclaimer: if you don't fall under the 'Motorsports Australia manual' we would need supplied documentation to make sure we meet your regulations.

Question 9

Will i void my warranty?

Accepted Answer

As there is a vast array of warranty systems depending on the manufacturer we can't guarantee it won't be affected,
we suggest you call your warranty holder and ask them directly before making your decision.

We do however keep the main stock components needed to run the car smoothly and efficient.
Our airbox supply tubes are designed to be the same size and house the stock MAF sensor so the car runs as it should.

Question 10

Can i get a custom snorkel end cap installed?

Accepted Answer

We can install a custom end cap.
Depending on the design there will be an additional cost for design time and a one off cutting price.
Please feel free to contact us with your ideas and designs.

Question 11

Can i get a custom sticker for my snorkel?

Accepted Answer

We do our stickers in house, meaning we can cut custom stickers depending on the design and colour.
if we can help we will, so feel free to contact us with ideas and designs.

Frequently asked questions